Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

product-img product-img

434R95 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.53

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434R96 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.54

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434R97 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.75

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434R98 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.58

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434R99 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.47

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T01 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.69

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T02 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.55

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T03 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.60

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T04 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.72

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T05 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.53

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T06 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.69

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T07 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.60

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T08 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.58

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T09 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.71

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T10 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.59

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T11 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.60

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T12 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.73

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T13 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.94

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T31 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.99

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T32 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.78

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T33 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.70

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T34 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.46

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T35 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.47

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T36 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.73

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T37 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.18

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T38 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.83

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T39 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.73

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T40 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.75

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T41 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.83

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

434T42 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.56

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success