Search Products

FilterClear All

Inquiry

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

434T43 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.52

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T44 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.52

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T45 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.46

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434T46 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.53

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T47 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.53

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T48 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.53

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T49 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.52

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T50 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.53

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T51 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.53

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T52 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.55

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T53 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$6.25

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T54 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.58

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T55 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.71

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434T56 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.52

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T57 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.34

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T58 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.56

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434T59 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.36

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T60 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.56

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T61 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.15

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434T62 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.44

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T63 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.40

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T64 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.84

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434T65 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.32

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T66 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.72

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T67 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.52

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434T68 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.65

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T69 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.87

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T70 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.11

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434T71 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.58

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434T72 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.17

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success!success