Search Products

FilterClear All

Inquiry

Powdered-Metal Straight-Flute Hand Taps

33PC74 | Powdered-Metal Straight-Flute Hand Taps

$33.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC75 | Powdered-Metal Straight-Flute Hand Taps

$41.07

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC76 | Powdered-Metal Straight-Flute Hand Taps

$62.05

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC77 | Powdered-Metal Straight-Flute Hand Taps

$25.28

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC78 | Powdered-Metal Straight-Flute Hand Taps

$42.93

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC79 | Powdered-Metal Straight-Flute Hand Taps

$80.04

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC80 | Powdered-Metal Straight-Flute Hand Taps

$37.76

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC81 | Powdered-Metal Straight-Flute Hand Taps

$41.63

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC82 | Powdered-Metal Straight-Flute Hand Taps

$45.68

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC83 | Powdered-Metal Straight-Flute Hand Taps

$46.44

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC84 | Powdered-Metal Straight-Flute Hand Taps

$45.68

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC86 | Powdered-Metal Straight-Flute Hand Taps

$22.21

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC95 | Powdered-Metal Straight-Flute Hand Taps

$33.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC96 | Powdered-Metal Straight-Flute Hand Taps

$41.07

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC97 | Powdered-Metal Straight-Flute Hand Taps

$25.28

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC98 | Powdered-Metal Straight-Flute Hand Taps

$28.99

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PC99 | Powdered-Metal Straight-Flute Hand Taps

$41.60

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PD01 | Powdered-Metal Straight-Flute Hand Taps

$44.22

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PD02 | Powdered-Metal Straight-Flute Hand Taps

$48.56

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PD03 | Powdered-Metal Straight-Flute Hand Taps

$53.99

These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PD04 | Powdered-Metal Straight-Flute Hand Taps

$44.22

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33PD05 | Powdered-Metal Straight-Flute Hand Taps

$40.77

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH73 | Powdered-Metal Straight-Flute Hand Taps

$22.63

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH74 | Powdered-Metal Straight-Flute Hand Taps

$25.06

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH76 | Powdered-Metal Straight-Flute Hand Taps

$25.88

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH77 | Powdered-Metal Straight-Flute Hand Taps

$32.95

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH78 | Powdered-Metal Straight-Flute Hand Taps

$36.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH79 | Powdered-Metal Straight-Flute Hand Taps

$35.98

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH80 | Powdered-Metal Straight-Flute Hand Taps

$40.45

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart

33YH81 | Powdered-Metal Straight-Flute Hand Taps

$59.99

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed. Powdered-metal with high-speed steel taps are an economical alternative to powdered-metal with cobalt taps.

+ Add to Cart
× Success!success