These two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese die wrenches can hold collets and assemblies that are used as part of a quick two-piece die system.
+ Add to CartThese collets include a cap and guide that can be used with a two-piece die to create a two-piece die system assembly. The guide can be swapped out with another guide to allow the collet to be used with two-piece dies in a range of thread sizes.
+ Add to CartThese die wrenches can hold collets and assemblies that are used as part of a quick two-piece die system.
+ Add to CartThese die wrenches can hold collets and assemblies that are used as part of a quick two-piece die system.
+ Add to CartThese die wrenches can hold dies that are used as part of a quick two-piece die system. The dies fit into slots on the wrench and are held in place with a set screw, so there is no need to used a two-piece die system cap or guide with the dies.
+ Add to CartThese die wrenches can hold dies that are used as part of a quick two-piece die system. The dies fit into slots on the wrench and are held in place with a set screw, so there is no need to used a two-piece die system cap or guide with the dies.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to CartQuick two-piece die system assemblies come with a two-piece die, a guide, and a cap. Additional guides and two-piece dies can be used with the cap to change the thread size created by the assembly.
+ Add to CartThese two-piece dies are used with a compatible guide and cap to create a two-piece die system assembly. One two-piece die is seated into slots on a cap, and the guide screws into the bottom of the cap to hold the die in place.
+ Add to Cart