Search Products

FilterClear All

Inquiry

Rebar-Cutting Drill Bits

798HE5 | Rebar-Cutting Drill Bits

$31.77

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

798HE8 | Rebar-Cutting Drill Bits

$41.23

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

798HF5 | Rebar-Cutting Drill Bits

$23.26

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HF6 | Rebar-Cutting Drill Bits

$24.79

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HF7 | Rebar-Cutting Drill Bits

$25.85

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HF8 | Rebar-Cutting Drill Bits

$37.63

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HF9 | Rebar-Cutting Drill Bits

$30.02

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG0 | Rebar-Cutting Drill Bits

$30.94

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG1 | Rebar-Cutting Drill Bits

$43.49

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG2 | Rebar-Cutting Drill Bits

$31.16

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG4 | Rebar-Cutting Drill Bits

$45.22

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG5 | Rebar-Cutting Drill Bits

$40.67

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG6 | Rebar-Cutting Drill Bits

$42.95

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG7 | Rebar-Cutting Drill Bits

$46.37

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG8 | Rebar-Cutting Drill Bits

$51.30

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HG9 | Rebar-Cutting Drill Bits

$53.74

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HH0 | Rebar-Cutting Drill Bits

$57.70

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

798HH1 | Rebar-Cutting Drill Bits

$64.19

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

2PPZ1 | Rebar-Cutting Drill Bits

$30.67

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ2 | Rebar-Cutting Drill Bits

$31.46

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ3 | Rebar-Cutting Drill Bits

$34.73

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ4 | Rebar-Cutting Drill Bits

$38.71

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ5 | Rebar-Cutting Drill Bits

$38.86

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ6 | Rebar-Cutting Drill Bits

$49.94

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ7 | Rebar-Cutting Drill Bits

$49.54

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ8 | Rebar-Cutting Drill Bits

$56.79

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

2PPZ9 | Rebar-Cutting Drill Bits

$59.99

The SDS-Plus shank on these rebar cutters prevents them from slipping in high-torque rebar-cutting applications. The bits install into compatible rotary hammer drills with SDS-Plus chucks, and the drills must be set to rotation-only mode (no hammer action) when drilling through embedded rebar or wire mesh with these bits. The bits can be changed in the chucks with one hand, allowing users to quickly switch between standard masonry and concrete drill bits and the rebar-cutting drill bits. SDS-Plus chucks have spring-loaded balls that fit into the grooves on the bits' shanks to hold the bits in place in the chucks.

+ Add to Cart

6LFJ3 | Rebar-Cutting Drill Bits

$25.21

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

6LFJ4 | Rebar-Cutting Drill Bits

$26.43

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart

6LFJ5 | Rebar-Cutting Drill Bits

$29.95

These rebar cutters have three-flat shanks and install into rotary hammer drills or other drills with standard three-jaw chucks for drilling through embedded rebar or wire mesh. The drills must be set for rotation only (hammer action should be turned off) when drilling with these bits.

+ Add to Cart
× Success!success