Search Products

FilterClear All

Inquiry

Taper-Length Drill Bits

53AW90 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53AW91 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53AW92 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53AW93 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53AW94 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53AW95 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53AW96 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53AW97 | Taper-Length Drill Bits

$174.50

The TiAlN/AlCrN multilayer coating on these drill bits protects the bits from wear and extends their life when drilling steel and cast iron. As one layer of the coating wears down, a new layer is exposed. These drill bits have holes that allow coolant to flow to their tip to reduce heat and help clear chips during drilling. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel or cobalt bits and require a rigid setup such as a drill press. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP12 | Taper-Length Drill Bits

$45.00

These drill bits come in standard sizes expressed in fractional inches. The bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP65 | Taper-Length Drill Bits

$13.22

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP67 | Taper-Length Drill Bits

$23.53

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP68 | Taper-Length Drill Bits

$10.47

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP69 | Taper-Length Drill Bits

$50.24

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP70 | Taper-Length Drill Bits

$33.05

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP71 | Taper-Length Drill Bits

$18.80

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP72 | Taper-Length Drill Bits

$14.38

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP73 | Taper-Length Drill Bits

$42.54

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP75 | Taper-Length Drill Bits

$52.88

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP78 | Taper-Length Drill Bits

$19.84

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP79 | Taper-Length Drill Bits

$20.13

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

53FP82 | Taper-Length Drill Bits

$23.95

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XY9 | Taper-Length Drill Bits

$6.65

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ0 | Taper-Length Drill Bits

$7.36

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ1 | Taper-Length Drill Bits

$7.78

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ2 | Taper-Length Drill Bits

$7.64

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ3 | Taper-Length Drill Bits

$13.82

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ4 | Taper-Length Drill Bits

$13.90

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ5 | Taper-Length Drill Bits

$16.13

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ6 | Taper-Length Drill Bits

$16.71

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart

809XZ7 | Taper-Length Drill Bits

$19.85

These bits have a straw/bronze finish that improves their wear resistance. Cobalt drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.

+ Add to Cart
× Success!success