Product catagories

Search Products

41AE90 Carbide-Tipped Jobber-Length Drill Bits

$11.81

Bulk orders will be discounted, please contact us.

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

Product Number: 41AE90

Add to Wishlist Add to Compare

SEND INQUIRY

  • Description
Mfr Model 12002210
Measurement System Wire
Drill Bit Size #2
Decimal Equivalent 0.2210
Overall Length 3-3/4 in
Shank Diameter 5.6 mm
Shank Type Machining Straight
Finish Machining Bright (Uncoated)
Material Machining Carbide Tipped
Primary Material Application All Materials
UNSPSC 27112801
Country of Origin USA (subject to change)
Cutting Direction Right Hand
Flute Length 2-1/2 in
Flute Type Spiral
Standards Not Rated
Drill Bit Point Angle 118 °
Drill Bit Point Type Cam Relieved Point
Number of Flutes 2
Spiral Direction Right Hand
Helix Angle 30°
Depth Dia Ratio 9xD
Primary Material Application ISO Code H; K; M; N; O; P; S
Drill Length Class Jobber Length
Drill Point Length 1.68mm
Shank Length 1-1/4 in
Coolant Fed Non-Coolant Through
Drill Diameter Tolerance +0.0000 in /-0.0007 in

You may also like

× Success！success