Product catagories

Search Products

440K01 High-Speed Steel Extended-Length Drill Bits

$33.92

Bulk orders will be discounted, please contact us.

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

Product Number: 440K01

Add to Wishlist Add to Compare

SEND INQUIRY

  • Description
Mfr Model A1549TFP-3.9
Measurement System Metric
Drill Bit Size 3.90 mm
Decimal Equivalent 0.1535
Maximum Drilling Depth 3-1/16 in
Overall Length 119.00 mm
Shank Type Machining Straight
Finish Machining TiNAl
Material Machining High Speed Steel
Primary Material Application Aluminum; Brass; Bronze; Cast Iron; Copper; Stainless Steel; Steel
UNSPSC 27112801
Country of Origin Brazil (subject to change)
Cutting Direction Right Hand
Flute Length 3-1/16 in
Flute Type Parabolic
Standards DIN 340
Drill Bit Point Angle 130 °
Drill Bit Point Type Conventional Point
Number of Flutes 2
Spiral Direction Right Hand
Helix Angle 28°
Depth Dia Ratio 12xD
Shank Dia 3.90 mm
Primary Material Application ISO Code K; M; N; P
Material Grade Machining TFP
Drill Length Class Extra Long
Sheeter Drill No
Drill Point Length 0.909mm
Shank Length 41.00 mm
Coolant Fed Non-Coolant Through
Drill Diameter Tolerance H8
Secondary Material Application Heat-Resistant Alloy; Synthetic Material & Graphite
Secondary Material Application ISO Code O; S

You may also like

× Success！success