Search Products

4FUA3 Countersink & Center Drill Sets

$86.42

Bulk orders will be discounted, please contact us.

Center drills consist of a pilot drill and a countersink and are used to create holes at the center of a piece of stock so it can be turned between centers on a lathe. The pilot drill creates a small hole in the stock and the countersink expands the hole, leaving a small gap at the bottom of the hole that helps protect the lathe's centers from damage when the stock is turned on it. These sets contain multiple center drills in a range of sizes.

Product Number: 4FUA3

SEND INQUIRY

  • Description
Mfr Model 10002
Measurement System Fractional Inch
Material Machining Cobalt
UNSPSC 27112812
Country of Origin USA (subject to change)
Countersink Angle 60 °
Number of Flutes 1
Finish Machining Bright (Uncoated)
Shank Type Machining Straight
Primary Material Application Stainless Steel
Primary Material Application ISO Code M2
Cutting Direction Machining Right Hand
Number of Pieces 5
Body Diameters Included 1/8 in; 3/16 in; 1/4 in; 5/16 in; 7/16 in
Includes Wood Holder
Largest Body Dia 7/16 in
Smallest Body Dia 1/8 in
× Success!success