Search Products

52TK77 Carbide Chucking Reamers with Straight Shank

$46.33

Bulk orders will be discounted, please contact us.

Left-hand spiral-flute carbide chucking reamers push chips into a hole as they enter a workpiece. They are used for reaming through holes, and they typically leave a finer finish on the hole than right-hand spiral-flute chucking reamers and straight-flute chucking reamers. The reamers’ bright finish is unaffected when their cutting edges are resharpened. Reamers are used to enlarge a hole to an exact size for a precise fit when installing fasteners or other parts. These carbide reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool.

Product Number: 52TK77

SEND INQUIRY

  • Description
Mfr Model 88860003500
Flute Type Spiral
Decimal Equivalent 0.1378
Flute Length 7/16 in
Overall Length 2-1/4 in
Number of Flutes 6
Measurement System Decimal Inch
Reamer Application Through Hole
Size Decimal 0.1378 in - 0.1378
UNSPSC 23171610
Country of Origin France (subject to change)
Spiral Direction Left Hand
Cutting Dia Tolerance +0.0016 in /-0.0000 in
Primary Material Application All Materials
Secondary Material Application All Materials
Primary Material Application ISO Code K; M; N; S1
Secondary Material Application ISO Code H
Reamer Size 1/8 in
Chamfer Angle 45 °
Coolant Fed Non-Coolant Through
Shank Type Straight
Shank Diameter 1/8 in
Material Carbide
Finish Bright (Uncoated)
Cutting Direction Right Hand
Material Applications Cast Iron; Heat-Resistant Alloys; Stainless Steel; Titanium
List Number F2482
× Success!success