Product catagories

Search Products

785UD9 High-Performance Finishing Coated Carbide Corner-Radius End Mills

$365.65

Bulk orders will be discounted, please contact us.

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

Product Number: 785UD9

Add to Wishlist Add to Compare

SEND INQUIRY

  • Description
Mfr Model 4X0EM25008RKT WS15PE
Material Machining Carbide
Finish Machining AlTiN
Measurement System Metric
Milling Dia 25.00 mm
Length of Cut 50.00 mm
Overall Length 121.00 mm
Shank Dia 25.00 mm
Shank Type Machining Straight
End Mill Style Corner Radius
Number of Flutes 4
End Mill Application Drilling; Helical Milling; Plunge Milling; Ramping :; Side Milling/Shoulder Milling: Square End; Slotting: Square End; Trochoidal Milling
Drilling Tool Configuration Individual
End Mill Cutting Type Center Cutting
List Number 4X0E
Material Grade Machining WS15PE
Primary Material Application Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Primary Material Application ISO Code H; K; M; P; S
UNSPSC 23172005
Country of Origin Israel (subject to change)
Material Applications Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Flute Type Helical
Spiral Direction Right Hand
Coolant Fed Non-Coolant Through
Secondary Material Application Hardened Steels: 35-45 HRC
Secondary Material Application ISO Code H
Corner Radius 1.50mm
Helix Angle 30°
Cutting Direction Right Hand
Neck Length 5 in
Max Helix Angle 30 °
Neck Dia 0.9500 in

You may also like

× Success！success