Search Products

785UG6 High-Performance Finishing Carbide Square End Mills

$67.33

Bulk orders will be discounted, please contact us.

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

Product Number: 785UG6

SEND INQUIRY

  • Description
Mfr Model 4XNEM10004SZT WS15PE
Length of Cut 20.00 mm
Overall Length 72.00 mm
Neck Length 0.3701 in
Measurement System Metric
Number of Flutes 4
End Mill Style Square
Primary Material Application Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
End Mill Cutting Type Center Cutting
List Number 4XNE
Helix Angle 30 °
Cutting Direction Right Hand
Coolant Fed Non-Coolant Through
Drilling Tool Configuration Individual
UNSPSC 27112803
Country of Origin Israel (subject to change)
Shank Type Straight
Material Carbide
Finish AlTiN
Milling Diameter 10.00 mm
Shank Diameter 10.00 mm
End Mill Application Drilling; Helical Milling; Plunge Milling; Ramping :; Side Milling/Shoulder Milling: Square End; Slotting: Square End; Trochoidal Milling
Material Grade WS15PE
Primary Material Application ISO Code H; K; M; P; S
Spiral Direction Right Hand
Secondary Material Application Hardened Steel
Secondary Material Application ISO Code H
Material Applications Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Flute Type Helical
Max Helix Angle 30 °
Neck Dia 9.40 mm
For Material Hardness 0 to 45 HRC
× Success!success