Search Products

785UK6 High-Performance Finishing Coated Carbide Corner-Radius End Mills

$41.99

Bulk orders will be discounted, please contact us.

These end mills come in standard sizes expressed in decimal inches. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

Product Number: 785UK6

SEND INQUIRY

  • Description
Mfr Model 4X0EE08003RAT WS15PE
Material Machining Carbide
Finish Machining AlTiN
Measurement System Decimal Inch
Milling Dia 0.3125 in
Length of Cut 0.7500 in
Overall Length 2.500 in
Shank Dia 0.3125 in
Shank Type Machining Straight
End Mill Style Corner Radius
Number of Flutes 4
End Mill Application Drilling; Helical Milling; Plunge Milling; Ramping :; Side Milling/Shoulder Milling: Square End; Slotting: Square End; Trochoidal Milling
Drilling Tool Configuration Individual
End Mill Cutting Type Center Cutting
List Number 4X0E
Material Grade Machining WS15PE
Primary Material Application Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Primary Material Application ISO Code H; K; M; P; S
UNSPSC 23172005
Country of Origin Israel (subject to change)
Material Applications Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Flute Type Helical
Spiral Direction Right Hand
Coolant Fed Non-Coolant Through
Secondary Material Application Hardened Steels: 35-45 HRC
Secondary Material Application ISO Code H
Corner Radius 0.381 in
Helix Angle 30°
Cutting Direction Right Hand
Neck Length 0.7402 in
Max Helix Angle 30 °
Neck Dia 18.80 mm
× Success!success