Search Products

785UP4 High-Performance Finishing Carbide Square End Mills

$29.90

Bulk orders will be discounted, please contact us.

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

Product Number: 785UP4

SEND INQUIRY

  • Description
Mfr Model 4X4EE07002SZT WS15PE
Length of Cut 0.3750 in
Overall Length 2.000 in
Neck Length 0.7402 in
Measurement System Decimal Inch
Number of Flutes 4
End Mill Style Square
Primary Material Application Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
End Mill Cutting Type Center Cutting
List Number 4X4E
Helix Angle 30 °
Cutting Direction Right Hand
Coolant Fed Non-Coolant Through
Drilling Tool Configuration Individual
UNSPSC 27112803
Country of Origin Israel (subject to change)
Shank Type Straight
Material Carbide
Finish AlTiN
Milling Diameter 0.2500 in
Shank Diameter 0.2500 in
End Mill Application Drilling; Helical Milling; Plunge Milling; Ramping :; Side Milling/Shoulder Milling: Square End; Slotting: Square End; Trochoidal Milling
Material Grade WS15PE
Primary Material Application ISO Code H; K; M; P; S
Spiral Direction Right Hand
Secondary Material Application Hardened Steel
Secondary Material Application ISO Code H
Material Applications Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Flute Type Helical
Max Helix Angle 30 °
Neck Dia 18.80 mm
For Material Hardness 0 to 45 HRC
× Success!success