Product catagories

Search Products

807NG7 High-Speed Steel Extended-Length Drill Bits

$3.83

Bulk orders will be discounted, please contact us.

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

Product Number: 807NG7

Add to Wishlist Add to Compare

SEND INQUIRY

  • Description
Mfr Model 47807
Measurement System Decimal Inch
Drill Bit Size 0.2660 in
Decimal Equivalent 0.2660 in
Maximum Drilling Depth 2.1563 in
Overall Length 4.125 in
Shank Type Machining Straight
Finish Machining Straw
Material Machining High Speed Steel
Primary Material Application Stainless Steel; Steel; Titanium
UNSPSC 27112801
Country of Origin USA (subject to change)
Cutting Direction Right Hand
Flute Length 2-7/8 in
Flute Type Spiral
Standards Not Rated
Drill Bit Point Angle 135 °
Drill Bit Point Type Split Point
Number of Flutes 2
Spiral Direction Right Hand
Helix Angle 21° to 34°
Depth Dia Ratio 4xD
Shank Dia 0.266 in
Primary Material Application ISO Code P
Material Grade Machining Heavy Duty
Drill Length Class Jobber Length
Sheeter Drill No
Drill Point Length 0.0647 in
Shank Length 1.25 in
Coolant Fed Non-Coolant Through
Drill Diameter Tolerance +0.0000 in /-0.0010 in
Secondary Material Application Aluminum; Brass; Bronze; Composite; Copper; Graphite; Steel
Secondary Material Application ISO Code N; O; P

You may also like

× Success！success