Search Products

827EJ8 Carbide-Tipped Jobber-Length Drill Bits

$9.31

Bulk orders will be discounted, please contact us.

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

Product Number: 827EJ8

SEND INQUIRY

  • Description
Mfr Model 85951
Measurement System Wire
Drill Bit Size #5
Decimal Equivalent 0.2055
Overall Length 3-3/4 in
Shank Diameter 13/64 in
Shank Type Machining Straight
Finish Machining Bright (Uncoated)
Material Machining Carbide Tipped
Primary Material Application All Materials
UNSPSC 27112801
Country of Origin Spain (subject to change)
Cutting Direction Right Hand
Flute Length 2-1/2 in
Flute Type Spiral
Standards Not Rated
Series CTD
Drill Bit Point Angle 118 °
Drill Bit Point Type Conventional Point
Number of Flutes 2
Spiral Direction Right Hand
Helix Angle 30°
Depth Dia Ratio 5xD
Primary Material Application ISO Code H; K; M; N; O; P; S
Material Grade Machining General Purpose
Drill Length Class Jobber Length
Sheeter Drill No
Drill Point Length 7.62mm
Shank Length 4-5/8 in
Coolant Fed Non-Coolant Through
Drill Diameter Tolerance +0.0000 in /-0.0010 in
× Success!success