Product catagories

Search Products

FilterClear All

Inquiry

Boring Bars

product-img product-img

15T749 | Boring Bars

$22.70

id :1059, Mfr Model :MBB-040150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0240 in, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0080 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0240 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T750 | Boring Bars

$22.11

id :1060, Mfr Model :MBB-045100, Cutting Direction :Right Hand, Center to Cutting Tip :0.0270 in, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0090 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0450 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T751 | Boring Bars

$23.44

id :1061, Mfr Model :MBB-045150, Cutting Direction :Right Hand, Center to Cutting Tip :0.0270 in, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0090 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.0450 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T756 | Boring Bars

$20.60

id :1062, Mfr Model :MBBM-005020, Cutting Direction :Right Hand, Center to Cutting Tip :0.29mm, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :38.00mm, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :3.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.10mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :2.00mm, Measurement System :Metric, Min Bore Dia :0.50mm, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T758 | Boring Bars

$20.87

id :1063, Mfr Model :MBBM-006025, Cutting Direction :Right Hand, Center to Cutting Tip :0.36mm, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :38.00mm, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :3.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.12mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :2.50mm, Measurement System :Metric, Min Bore Dia :0.60mm, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T760 | Boring Bars

$20.87

id :1064, Mfr Model :MBBM-007030, Cutting Direction :Right Hand, Center to Cutting Tip :0.42mm, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :38.00mm, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :3.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.14mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3.00mm, Measurement System :Metric, Min Bore Dia :0.70mm, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T764 | Boring Bars

$20.87

id :1065, Mfr Model :MBBM-008030, Cutting Direction :Right Hand, Center to Cutting Tip :0.48mm, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :38.00mm, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :3.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3.00mm, Measurement System :Metric, Min Bore Dia :0.80mm, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T766 | Boring Bars

$20.87

id :1066, Mfr Model :MBBM-008040, Cutting Direction :Right Hand, Center to Cutting Tip :0.48mm, Features :On-Center Neck Design;Sharp Corner Profile;Split Geometry, Cutting Application :Boring, Overall Length :38.00mm, Radius :0.0050 in to 0.0080 in, Boring Bar Type :Boring, Shank Dia :3.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :1.5 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :4.00mm, Measurement System :Metric, Min Bore Dia :0.80mm, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0270 in, Overhang :3.0400 in,

+ Add to Cart
product-img product-img

15T780 | Boring Bars

$23.12

id :1067, Mfr Model :QBM-118500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0030 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1180 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T781 | Boring Bars

$26.66

id :1068, Mfr Model :QBM-118500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0030 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1180 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T782 | Boring Bars

$23.14

id :1069, Mfr Model :QBM-118750, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0030 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1180 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T783 | Boring Bars

$26.71

id :1070, Mfr Model :QBM-118750X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0550 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0030 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1180 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0550 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T784 | Boring Bars

$22.79

id :1071, Mfr Model :QBM-150500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0710 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0030 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0710 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T785 | Boring Bars

$26.57

id :1072, Mfr Model :QBM-150500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0710 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0030 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0710 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T786 | Boring Bars

$22.84

id :1073, Mfr Model :QBM-150750, Cutting Direction :Right Hand, Center to Cutting Tip :0.0710 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0030 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0710 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T787 | Boring Bars

$26.71

id :1074, Mfr Model :QBM-150750X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0710 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0710 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T788 | Boring Bars

$23.36

id :1075, Mfr Model :QBM-2001250, Cutting Direction :Right Hand, Center to Cutting Tip :0.0950 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2-1/2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1-1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0950 in, Overhang :1.3530 in,

+ Add to Cart
product-img product-img

15T789 | Boring Bars

$26.74

id :1076, Mfr Model :QBM-2001250X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0950 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2-1/2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1-1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0950 in, Overhang :1.3530 in,

+ Add to Cart
product-img product-img

15T790 | Boring Bars

$23.23

id :1077, Mfr Model :QBM-200500, Cutting Direction :Right Hand, Center to Cutting Tip :0.0950 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.2000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0950 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T791 | Boring Bars

$26.65

id :1078, Mfr Model :QBM-200500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0950 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.2000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0950 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T792 | Boring Bars

$23.12

id :1079, Mfr Model :QBM-200750, Cutting Direction :Right Hand, Center to Cutting Tip :0.0950 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0950 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T793 | Boring Bars

$28.09

id :1080, Mfr Model :QBM-200750X, Cutting Direction :Right Hand, Center to Cutting Tip :0.0950 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.0950 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T794 | Boring Bars

$23.23

id :1081, Mfr Model :QBM-2301250, Cutting Direction :Right Hand, Center to Cutting Tip :0.1100 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2-1/2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1-1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.1100 in, Overhang :1.3530 in,

+ Add to Cart
product-img product-img

15T795 | Boring Bars

$27.11

id :1082, Mfr Model :QBM-2301250X, Cutting Direction :Right Hand, Center to Cutting Tip :0.1100 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2-1/2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1-1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.1100 in, Overhang :1.3530 in,

+ Add to Cart
product-img product-img

15T796 | Boring Bars

$26.27

id :1083, Mfr Model :QBM-2301500, Cutting Direction :Right Hand, Center to Cutting Tip :0.1100 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :3 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1-1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.2300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.1100 in, Overhang :1.8530 in,

+ Add to Cart
product-img product-img

15T797 | Boring Bars

$29.90

id :1084, Mfr Model :QBM-2301500X, Cutting Direction :Right Hand, Center to Cutting Tip :0.1100 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :3 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :1-1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.2300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.1100 in, Overhang :1.8530 in,

+ Add to Cart
product-img product-img

15T798 | Boring Bars

$23.12

id :1085, Mfr Model :QBM-230750, Cutting Direction :Right Hand, Center to Cutting Tip :0.1100 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.1100 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T799 | Boring Bars

$28.09

id :1086, Mfr Model :QBM-230750X, Cutting Direction :Right Hand, Center to Cutting Tip :0.1100 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring, Overall Length :2 in, Radius :0.0080 in, Boring Bar Type :Boring, Shank Dia :1/4 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :10 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.17mm, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.2300 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :0.1100 in, Overhang :0.8530 in,

+ Add to Cart
product-img product-img

15T823 | Boring Bars

$21.56

id :1087, Mfr Model :QBT-050200, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0440 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring; Finishing, Overall Length :1-1/2 in, Radius :0.0020 in, Boring Bar Type :Top Rake Chipbreaker, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :20 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0440 in, Overhang :0.5900 in,

+ Add to Cart
product-img product-img

15T824 | Boring Bars

$23.95

id :1088, Mfr Model :QBT-050200X, Cutting Direction :Right Hand, Center to Cutting Tip :-0.0440 in, Features :Coolant Fed Enabled Shank Design;Corner Radius Profile;Polished Face for Reducing Galling, Cutting Application :Boring; Finishing, Overall Length :1-1/2 in, Radius :0.0020 in, Boring Bar Type :Top Rake Chipbreaker, Shank Dia :3/16 in, Finish Machining :AlTiN, Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :20 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.0050 in, Coolant Fed :Coolant Through, For Use With :Jig Bore Machines, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.0500 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Nickel; Titanium, Primary Material Application ISO Code :S, Compatible with Product Type :Micro-Quik Tool Holder, Offset Point :-0.0440 in, Overhang :0.5900 in,

+ Add to Cart
× Success！success