Search Products

FilterClear All

Inquiry

Finishing Cobalt Square End Mills

55GD27 | Finishing Cobalt Square End Mills

$399.16

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GD28 | Finishing Cobalt Square End Mills

$361.52

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GD29 | Finishing Cobalt Square End Mills

$522.20

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GD30 | Finishing Cobalt Square End Mills

$482.59

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GD43 | Finishing Cobalt Square End Mills

$181.84

Eight-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

55GD44 | Finishing Cobalt Square End Mills

$257.80

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55HF64 | Finishing Cobalt Square End Mills

$38.80

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55HF65 | Finishing Cobalt Square End Mills

$42.38

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55HF66 | Finishing Cobalt Square End Mills

$238.42

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC79 | Finishing Cobalt Square End Mills

$50.45

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC80 | Finishing Cobalt Square End Mills

$33.55

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC81 | Finishing Cobalt Square End Mills

$33.55

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC82 | Finishing Cobalt Square End Mills

$33.55

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC83 | Finishing Cobalt Square End Mills

$80.65

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC84 | Finishing Cobalt Square End Mills

$33.55

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC85 | Finishing Cobalt Square End Mills

$33.55

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC86 | Finishing Cobalt Square End Mills

$65.37

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC87 | Finishing Cobalt Square End Mills

$50.35

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

56GC88 | Finishing Cobalt Square End Mills

$100.93

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

35DH48 | Finishing Cobalt Square End Mills

$27.45

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH49 | Finishing Cobalt Square End Mills

$27.45

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH50 | Finishing Cobalt Square End Mills

$32.71

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH51 | Finishing Cobalt Square End Mills

$34.65

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH52 | Finishing Cobalt Square End Mills

$34.60

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH53 | Finishing Cobalt Square End Mills

$37.49

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH54 | Finishing Cobalt Square End Mills

$37.24

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH55 | Finishing Cobalt Square End Mills

$48.74

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH56 | Finishing Cobalt Square End Mills

$48.53

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH57 | Finishing Cobalt Square End Mills

$51.75

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DH58 | Finishing Cobalt Square End Mills

$54.73

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success!success