Search Products

FilterClear All

Inquiry

Finishing Cobalt Square End Mills

35DJ20 | Finishing Cobalt Square End Mills

$30.89

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ21 | Finishing Cobalt Square End Mills

$33.37

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ22 | Finishing Cobalt Square End Mills

$218.17

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ23 | Finishing Cobalt Square End Mills

$24.90

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ24 | Finishing Cobalt Square End Mills

$35.45

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ25 | Finishing Cobalt Square End Mills

$24.68

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ26 | Finishing Cobalt Square End Mills

$35.45

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ27 | Finishing Cobalt Square End Mills

$24.50

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ28 | Finishing Cobalt Square End Mills

$32.99

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ29 | Finishing Cobalt Square End Mills

$33.51

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ30 | Finishing Cobalt Square End Mills

$46.85

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ31 | Finishing Cobalt Square End Mills

$32.41

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ32 | Finishing Cobalt Square End Mills

$44.69

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ33 | Finishing Cobalt Square End Mills

$63.71

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ34 | Finishing Cobalt Square End Mills

$44.41

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ35 | Finishing Cobalt Square End Mills

$54.39

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ36 | Finishing Cobalt Square End Mills

$79.93

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ37 | Finishing Cobalt Square End Mills

$53.93

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ38 | Finishing Cobalt Square End Mills

$66.36

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ39 | Finishing Cobalt Square End Mills

$100.61

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ40 | Finishing Cobalt Square End Mills

$65.06

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ41 | Finishing Cobalt Square End Mills

$127.15

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

35DJ42 | Finishing Cobalt Square End Mills

$89.31

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ43 | Finishing Cobalt Square End Mills

$126.37

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ45 | Finishing Cobalt Square End Mills

$126.37

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ46 | Finishing Cobalt Square End Mills

$169.88

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ47 | Finishing Cobalt Square End Mills

$271.34

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ48 | Finishing Cobalt Square End Mills

$322.43

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ49 | Finishing Cobalt Square End Mills

$52.83

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35DJ50 | Finishing Cobalt Square End Mills

$62.81

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success!success