Search Products

FilterClear All

Inquiry

General Purpose Finishing Coated Carbide Corner-Radius End Mills

56GA28 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$508.21

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA29 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$227.72

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA30 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$234.56

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA31 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$234.56

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA32 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$229.55

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA33 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$229.55

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA34 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$156.01

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA35 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$153.38

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA36 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$160.69

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA37 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$160.69

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA38 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$106.04

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA39 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$106.04

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA40 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$101.30

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA41 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$106.04

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA42 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$106.04

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA43 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$106.04

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA44 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$164.97

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA45 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$167.89

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA46 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$164.19

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA47 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$167.89

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA48 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$161.09

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA49 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$167.89

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA50 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$230.12

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA51 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$239.84

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA52 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$239.84

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA53 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$235.67

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA54 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$235.67

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA55 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$235.67

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA56 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$235.67

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56GA58 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$312.69

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
× Success!success