Search Products

FilterClear All

Inquiry

General Purpose Finishing Coated High-Speed Steel Square End Mills

438A78 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$70.49

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

438A79 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$82.72

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

438A80 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$78.56

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

438A81 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$99.49

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

438A82 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$97.66

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

438A83 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$107.48

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

438A84 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$131.83

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GM35 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$60.40

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GM36 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$54.88

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT08 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$228.08

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT17 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$221.27

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT19 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$287.92

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT20 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$262.83

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT23 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$348.91

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT25 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$464.08

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT30 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$287.92

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT33 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$339.44

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT34 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$311.62

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT36 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$380.33

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT39 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$464.08

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT51 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$159.06

Eight-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT52 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$148.83

Eight-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT53 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$166.91

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT54 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$141.13

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT56 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$189.02

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT60 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$192.56

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55GT62 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$274.34

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55GT63 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$249.61

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

55HF25 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$22.70

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

55HF29 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$48.20

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
× Success!success