Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Finishing Coated High-Speed Steel Square End Mills

product-img product-img

55HF31 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$21.01

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55HF33 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$22.25

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

61KZ08 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$62.67

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

61KZ13 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$104.50

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

61KZ15 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$123.93

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

61KZ19 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$204.22

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

61KZ20 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$44.57

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

61KZ25 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$82.73

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

61KZ27 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$113.42

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

61KZ31 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$163.43

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438C68 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$142.04

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438C71 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$94.06

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438C72 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$10.03

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438C73 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$24.83

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438C74 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$22.91

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GK98 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$43.15

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GL04 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$61.40

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL05 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$55.88

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GL26 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$30.72

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL27 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$28.28

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GL28 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$33.69

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL29 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$29.69

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GL34 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$40.19

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL35 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$36.11

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GL37 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$54.87

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL38 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$49.26

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GL72 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$36.59

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL78 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$52.37

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL84 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$36.75

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GL85 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$33.85

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
× Success！success