Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

45XX39 | General Purpose Roughing/Finishing Carbide Ball End Mills

$156.34

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XX40 | General Purpose Roughing/Finishing Carbide Ball End Mills

$144.99

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XX41 | General Purpose Roughing/Finishing Carbide Ball End Mills

$158.58

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XX42 | General Purpose Roughing/Finishing Carbide Ball End Mills

$254.17

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XX43 | General Purpose Roughing/Finishing Carbide Ball End Mills

$270.25

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XX44 | General Purpose Roughing/Finishing Carbide Ball End Mills

$249.85

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XX45 | General Purpose Roughing/Finishing Carbide Ball End Mills

$265.62

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55HG13 | General Purpose Roughing/Finishing Carbide Ball End Mills

$185.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

55HG14 | General Purpose Roughing/Finishing Carbide Ball End Mills

$185.49

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

16F456 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.61

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F457 | General Purpose Roughing/Finishing Carbide Ball End Mills

$22.54

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F458 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.63

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F459 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.43

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F460 | General Purpose Roughing/Finishing Carbide Ball End Mills

$21.21

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F461 | General Purpose Roughing/Finishing Carbide Ball End Mills

$24.66

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F468 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.81

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F469 | General Purpose Roughing/Finishing Carbide Ball End Mills

$24.66

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F470 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.07

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F471 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.43

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F472 | General Purpose Roughing/Finishing Carbide Ball End Mills

$21.34

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F473 | General Purpose Roughing/Finishing Carbide Ball End Mills

$22.55

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F480 | General Purpose Roughing/Finishing Carbide Ball End Mills

$26.65

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F481 | General Purpose Roughing/Finishing Carbide Ball End Mills

$27.79

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F484 | General Purpose Roughing/Finishing Carbide Ball End Mills

$26.65

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F485 | General Purpose Roughing/Finishing Carbide Ball End Mills

$30.31

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F493 | General Purpose Roughing/Finishing Carbide Ball End Mills

$29.60

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F494 | General Purpose Roughing/Finishing Carbide Ball End Mills

$26.65

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F495 | General Purpose Roughing/Finishing Carbide Ball End Mills

$30.79

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F496 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.91

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F497 | General Purpose Roughing/Finishing Carbide Ball End Mills

$29.51

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success！success