Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

16F503 | General Purpose Roughing/Finishing Carbide Ball End Mills

$31.04

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F504 | General Purpose Roughing/Finishing Carbide Ball End Mills

$33.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F505 | General Purpose Roughing/Finishing Carbide Ball End Mills

$30.08

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F506 | General Purpose Roughing/Finishing Carbide Ball End Mills

$33.34

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F509 | General Purpose Roughing/Finishing Carbide Ball End Mills

$30.11

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F510 | General Purpose Roughing/Finishing Carbide Ball End Mills

$34.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F511 | General Purpose Roughing/Finishing Carbide Ball End Mills

$34.16

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F512 | General Purpose Roughing/Finishing Carbide Ball End Mills

$37.15

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F513 | General Purpose Roughing/Finishing Carbide Ball End Mills

$33.73

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F514 | General Purpose Roughing/Finishing Carbide Ball End Mills

$39.00

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F515 | General Purpose Roughing/Finishing Carbide Ball End Mills

$32.01

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F516 | General Purpose Roughing/Finishing Carbide Ball End Mills

$38.24

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F524 | General Purpose Roughing/Finishing Carbide Ball End Mills

$41.35

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F525 | General Purpose Roughing/Finishing Carbide Ball End Mills

$56.10

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F526 | General Purpose Roughing/Finishing Carbide Ball End Mills

$66.91

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F527 | General Purpose Roughing/Finishing Carbide Ball End Mills

$59.41

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F528 | General Purpose Roughing/Finishing Carbide Ball End Mills

$67.24

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F539 | General Purpose Roughing/Finishing Carbide Ball End Mills

$96.22

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F540 | General Purpose Roughing/Finishing Carbide Ball End Mills

$111.53

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F552 | General Purpose Roughing/Finishing Carbide Ball End Mills

$156.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F565 | General Purpose Roughing/Finishing Carbide Ball End Mills

$16.41

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F566 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F567 | General Purpose Roughing/Finishing Carbide Ball End Mills

$17.74

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F568 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.82

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F569 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.49

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F570 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.61

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F581 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.84

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F582 | General Purpose Roughing/Finishing Carbide Ball End Mills

$24.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F583 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.41

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F584 | General Purpose Roughing/Finishing Carbide Ball End Mills

$35.05

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success！success