Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

19LN05 | General Purpose Roughing/Finishing Carbide Ball End Mills

$90.13

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN06 | General Purpose Roughing/Finishing Carbide Ball End Mills

$104.84

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN13 | General Purpose Roughing/Finishing Carbide Ball End Mills

$12.62

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN14 | General Purpose Roughing/Finishing Carbide Ball End Mills

$12.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN15 | General Purpose Roughing/Finishing Carbide Ball End Mills

$17.91

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN16 | General Purpose Roughing/Finishing Carbide Ball End Mills

$15.89

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN34 | General Purpose Roughing/Finishing Carbide Ball End Mills

$6.98

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN35 | General Purpose Roughing/Finishing Carbide Ball End Mills

$9.75

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN36 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.30

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN37 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.33

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN38 | General Purpose Roughing/Finishing Carbide Ball End Mills

$9.67

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN39 | General Purpose Roughing/Finishing Carbide Ball End Mills

$12.62

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN40 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.49

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN41 | General Purpose Roughing/Finishing Carbide Ball End Mills

$12.62

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN42 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.01

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN43 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.08

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN44 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.11

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN45 | General Purpose Roughing/Finishing Carbide Ball End Mills

$17.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN46 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.31

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN47 | General Purpose Roughing/Finishing Carbide Ball End Mills

$17.96

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN48 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.61

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN49 | General Purpose Roughing/Finishing Carbide Ball End Mills

$16.42

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN50 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.38

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN51 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.64

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN52 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.11

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN53 | General Purpose Roughing/Finishing Carbide Ball End Mills

$23.12

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN54 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.27

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN55 | General Purpose Roughing/Finishing Carbide Ball End Mills

$26.61

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LN56 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.11

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LN57 | General Purpose Roughing/Finishing Carbide Ball End Mills

$23.12

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success！success