Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

19LN88 | General Purpose Roughing/Finishing Carbide Ball End Mills

$176.04

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP02 | General Purpose Roughing/Finishing Carbide Ball End Mills

$11.46

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP03 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.88

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP04 | General Purpose Roughing/Finishing Carbide Ball End Mills

$9.69

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP05 | General Purpose Roughing/Finishing Carbide Ball End Mills

$12.95

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP06 | General Purpose Roughing/Finishing Carbide Ball End Mills

$12.17

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP07 | General Purpose Roughing/Finishing Carbide Ball End Mills

$15.87

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP08 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.60

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP09 | General Purpose Roughing/Finishing Carbide Ball End Mills

$16.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP10 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.93

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP11 | General Purpose Roughing/Finishing Carbide Ball End Mills

$17.81

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP12 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.54

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP13 | General Purpose Roughing/Finishing Carbide Ball End Mills

$24.89

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP14 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.56

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP15 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP16 | General Purpose Roughing/Finishing Carbide Ball End Mills

$29.32

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP17 | General Purpose Roughing/Finishing Carbide Ball End Mills

$35.61

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP18 | General Purpose Roughing/Finishing Carbide Ball End Mills

$30.31

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP19 | General Purpose Roughing/Finishing Carbide Ball End Mills

$31.81

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP20 | General Purpose Roughing/Finishing Carbide Ball End Mills

$39.52

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP21 | General Purpose Roughing/Finishing Carbide Ball End Mills

$46.65

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP22 | General Purpose Roughing/Finishing Carbide Ball End Mills

$37.09

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP23 | General Purpose Roughing/Finishing Carbide Ball End Mills

$51.12

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP24 | General Purpose Roughing/Finishing Carbide Ball End Mills

$62.29

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP25 | General Purpose Roughing/Finishing Carbide Ball End Mills

$73.58

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP26 | General Purpose Roughing/Finishing Carbide Ball End Mills

$78.27

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP27 | General Purpose Roughing/Finishing Carbide Ball End Mills

$90.71

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP28 | General Purpose Roughing/Finishing Carbide Ball End Mills

$100.49

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LP29 | General Purpose Roughing/Finishing Carbide Ball End Mills

$115.96

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LP30 | General Purpose Roughing/Finishing Carbide Ball End Mills

$120.12

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success！success