Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

19LR87 | General Purpose Roughing/Finishing Carbide Ball End Mills

$59.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LR88 | General Purpose Roughing/Finishing Carbide Ball End Mills

$48.11

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LR89 | General Purpose Roughing/Finishing Carbide Ball End Mills

$59.05

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LR90 | General Purpose Roughing/Finishing Carbide Ball End Mills

$56.18

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LR91 | General Purpose Roughing/Finishing Carbide Ball End Mills

$67.43

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LR92 | General Purpose Roughing/Finishing Carbide Ball End Mills

$104.38

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LR93 | General Purpose Roughing/Finishing Carbide Ball End Mills

$121.76

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LR94 | General Purpose Roughing/Finishing Carbide Ball End Mills

$141.80

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LR95 | General Purpose Roughing/Finishing Carbide Ball End Mills

$161.51

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LR96 | General Purpose Roughing/Finishing Carbide Ball End Mills

$203.51

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LR97 | General Purpose Roughing/Finishing Carbide Ball End Mills

$247.54

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LR98 | General Purpose Roughing/Finishing Carbide Ball End Mills

$11.53

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LR99 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT01 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.69

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT02 | General Purpose Roughing/Finishing Carbide Ball End Mills

$21.28

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT03 | General Purpose Roughing/Finishing Carbide Ball End Mills

$15.35

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT04 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.87

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT05 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.92

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT06 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.22

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT07 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.11

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT08 | General Purpose Roughing/Finishing Carbide Ball End Mills

$32.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT09 | General Purpose Roughing/Finishing Carbide Ball End Mills

$28.37

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT10 | General Purpose Roughing/Finishing Carbide Ball End Mills

$42.98

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT11 | General Purpose Roughing/Finishing Carbide Ball End Mills

$47.99

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT12 | General Purpose Roughing/Finishing Carbide Ball End Mills

$59.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT13 | General Purpose Roughing/Finishing Carbide Ball End Mills

$48.11

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT14 | General Purpose Roughing/Finishing Carbide Ball End Mills

$53.14

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT15 | General Purpose Roughing/Finishing Carbide Ball End Mills

$54.79

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT16 | General Purpose Roughing/Finishing Carbide Ball End Mills

$69.26

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT18 | General Purpose Roughing/Finishing Carbide Ball End Mills

$102.12

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success！success