Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

19LT19 | General Purpose Roughing/Finishing Carbide Ball End Mills

$122.70

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT20 | General Purpose Roughing/Finishing Carbide Ball End Mills

$138.66

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT21 | General Purpose Roughing/Finishing Carbide Ball End Mills

$161.51

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT22 | General Purpose Roughing/Finishing Carbide Ball End Mills

$183.84

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT23 | General Purpose Roughing/Finishing Carbide Ball End Mills

$247.54

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT24 | General Purpose Roughing/Finishing Carbide Ball End Mills

$15.35

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT25 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.23

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT26 | General Purpose Roughing/Finishing Carbide Ball End Mills

$23.60

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT27 | General Purpose Roughing/Finishing Carbide Ball End Mills

$25.90

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT28 | General Purpose Roughing/Finishing Carbide Ball End Mills

$17.94

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT29 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.95

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT30 | General Purpose Roughing/Finishing Carbide Ball End Mills

$26.62

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT31 | General Purpose Roughing/Finishing Carbide Ball End Mills

$31.93

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT32 | General Purpose Roughing/Finishing Carbide Ball End Mills

$37.13

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT33 | General Purpose Roughing/Finishing Carbide Ball End Mills

$43.90

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT34 | General Purpose Roughing/Finishing Carbide Ball End Mills

$30.10

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT35 | General Purpose Roughing/Finishing Carbide Ball End Mills

$39.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT36 | General Purpose Roughing/Finishing Carbide Ball End Mills

$48.66

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT37 | General Purpose Roughing/Finishing Carbide Ball End Mills

$59.54

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT38 | General Purpose Roughing/Finishing Carbide Ball End Mills

$54.88

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT39 | General Purpose Roughing/Finishing Carbide Ball End Mills

$70.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT41 | General Purpose Roughing/Finishing Carbide Ball End Mills

$38.00

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT42 | General Purpose Roughing/Finishing Carbide Ball End Mills

$50.15

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT43 | General Purpose Roughing/Finishing Carbide Ball End Mills

$69.83

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT44 | General Purpose Roughing/Finishing Carbide Ball End Mills

$83.70

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT45 | General Purpose Roughing/Finishing Carbide Ball End Mills

$79.78

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT46 | General Purpose Roughing/Finishing Carbide Ball End Mills

$81.61

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LT47 | General Purpose Roughing/Finishing Carbide Ball End Mills

$97.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT48 | General Purpose Roughing/Finishing Carbide Ball End Mills

$102.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LT49 | General Purpose Roughing/Finishing Carbide Ball End Mills

$116.15

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success！success