Search Products

FilterClear All

Inquiry

Hex-Shank Drill Bits

53DM46 | Hex-Shank Drill Bits

$2.09

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM47 | Hex-Shank Drill Bits

$2.03

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM49 | Hex-Shank Drill Bits

$1.63

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM50 | Hex-Shank Drill Bits

$1.72

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM51 | Hex-Shank Drill Bits

$1.78

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM52 | Hex-Shank Drill Bits

$1.88

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM53 | Hex-Shank Drill Bits

$1.97

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM56 | Hex-Shank Drill Bits

$2.59

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM57 | Hex-Shank Drill Bits

$3.38

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM59 | Hex-Shank Drill Bits

$3.71

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM61 | Hex-Shank Drill Bits

$6.22

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

53DM63 | Hex-Shank Drill Bits

$10.66

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

61KX62 | Hex-Shank Drill Bits

$3.77

id :1882, Mfr Model :C20510, Measurement System :Fractional Inch, Drill Bit Size :1/16 in, Decimal Equivalent :0.0625, Overall Length :2-1/4 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :USA (subject to change), Cutting Direction :Right Hand, Flute Length :7/8 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

61KX63 | Hex-Shank Drill Bits

$3.58

id :1883, Mfr Model :C20512, Measurement System :Fractional Inch, Drill Bit Size :3/32 in, Decimal Equivalent :0.0938, Overall Length :2-7/16 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :USA (subject to change), Cutting Direction :Right Hand, Flute Length :1-1/4 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

61KX64 | Hex-Shank Drill Bits

$3.79

id :1884, Mfr Model :C20514, Measurement System :Fractional Inch, Drill Bit Size :1/8 in, Decimal Equivalent :0.125, Overall Length :2-5/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :USA (subject to change), Cutting Direction :Right Hand, Flute Length :1-5/8 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

61KX65 | Hex-Shank Drill Bits

$3.80

id :1885, Mfr Model :C20517, Measurement System :Fractional Inch, Drill Bit Size :5/32 in, Decimal Equivalent :0.1563, Overall Length :2-13/16 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :USA (subject to change), Cutting Direction :Right Hand, Flute Length :2 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

61KX66 | Hex-Shank Drill Bits

$3.88

id :1886, Mfr Model :C20518, Measurement System :Fractional Inch, Drill Bit Size :3/16 in, Decimal Equivalent :0.1875, Overall Length :3 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :USA (subject to change), Cutting Direction :Right Hand, Flute Length :2-5/16 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

61KX67 | Hex-Shank Drill Bits

$4.14

id :1887, Mfr Model :C20908, Measurement System :Fractional Inch, Drill Bit Size :7/32 in, Decimal Equivalent :0.2188, Overall Length :3-1/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :USA (subject to change), Cutting Direction :Right Hand, Flute Length :2-1/2 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

61KX68 | Hex-Shank Drill Bits

$3.85

id :1888, Mfr Model :C20909, Measurement System :Fractional Inch, Drill Bit Size :1/4 in, Decimal Equivalent :0.25, Overall Length :3-1/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :USA (subject to change), Cutting Direction :Right Hand, Flute Length :2-3/4 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A48 | Hex-Shank Drill Bits

$3.59

id :1889, Mfr Model :DWA5005, Measurement System :Fractional Inch, Drill Bit Size :5/64 in, Decimal Equivalent :0.0781, Overall Length :2-3/16 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :5/8 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A49 | Hex-Shank Drill Bits

$3.44

id :1890, Mfr Model :DWA5006, Measurement System :Fractional Inch, Drill Bit Size :3/32 in, Decimal Equivalent :0.0937, Overall Length :2-3/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :3/4 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A50 | Hex-Shank Drill Bits

$3.93

id :1891, Mfr Model :DWA5007, Measurement System :Fractional Inch, Drill Bit Size :7/64 in, Decimal Equivalent :0.1093, Overall Length :2-5/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :1-1/16 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A51 | Hex-Shank Drill Bits

$4.03

id :1892, Mfr Model :DWA5008, Measurement System :Fractional Inch, Drill Bit Size :1/8 in, Decimal Equivalent :0.125, Overall Length :2-7/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :China (subject to change), Cutting Direction :Right Hand, Flute Length :1-3/8 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A52 | Hex-Shank Drill Bits

$2.00

id :1893, Mfr Model :DWA5009, Measurement System :Fractional Inch, Drill Bit Size :9/64 in, Decimal Equivalent :0.1406, Overall Length :3 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :1-1/2 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A53 | Hex-Shank Drill Bits

$2.18

id :1894, Mfr Model :DWA5010, Measurement System :Fractional Inch, Drill Bit Size :5/32 in, Decimal Equivalent :0.1562, Overall Length :3-3/16 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :1-5/8 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A54 | Hex-Shank Drill Bits

$2.41

id :1895, Mfr Model :DWA5011, Measurement System :Fractional Inch, Drill Bit Size :11/64 in, Decimal Equivalent :0.1718, Overall Length :3-3/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :1-7/8 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A55 | Hex-Shank Drill Bits

$2.71

id :1896, Mfr Model :DWA5012, Measurement System :Fractional Inch, Drill Bit Size :3/16 in, Decimal Equivalent :0.1875, Overall Length :3-5/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :China (subject to change), Cutting Direction :Right Hand, Flute Length :2-1/8 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A56 | Hex-Shank Drill Bits

$3.58

id :1897, Mfr Model :DWA5013, Measurement System :Fractional Inch, Drill Bit Size :13/64 in, Decimal Equivalent :0.2031, Overall Length :3-3/4 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :2-3/16 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A57 | Hex-Shank Drill Bits

$3.75

id :1898, Mfr Model :DWA5014, Measurement System :Fractional Inch, Drill Bit Size :7/32 in, Decimal Equivalent :0.2187, Overall Length :3-7/8 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :2-5/16 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

807A58 | Hex-Shank Drill Bits

$3.95

id :1899, Mfr Model :DWA5015, Measurement System :Fractional Inch, Drill Bit Size :15/64 in, Decimal Equivalent :0.2343, Overall Length :4 in, Shank Type Machining :Hex, Finish Machining :Bright (Uncoated), Material Machining :High Speed Steel, Primary Material Application :Steel, UNSPSC :27112801, Country of Origin :Thailand (subject to change), Cutting Direction :Right Hand, Flute Length :2-1/2 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :10xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart
× Success!success