Search Products

FilterClear All

Inquiry

Hex-Shank Drill Bits

45CY64 | Hex-Shank Drill Bits

$6.67

id :1960, Mfr Model :DD5112, Measurement System :Fractional Inch, Drill Bit Size :3/16 in, Decimal Equivalent :0.1875, Overall Length :3 in, Shank Type Machining :Straight, Finish Machining :Titanium, Material Machining :Titanium Nitride Coating, Primary Material Application :Aluminum; Composite; Steel; Wood, UNSPSC :27112801, Country of Origin :China (subject to change), Cutting Direction :Right Hand, Flute Length :1-3/16 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :9xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

45CY72 | Hex-Shank Drill Bits

$10.69

id :1961, Mfr Model :DD5120, Measurement System :Fractional Inch, Drill Bit Size :3/16 in, Decimal Equivalent :0.3125, Overall Length :4 in, Shank Type Machining :Straight, Finish Machining :Titanium, Material Machining :Titanium Nitride Coating, Primary Material Application :Aluminum; Composite; Steel; Wood, UNSPSC :27112801, Country of Origin :China (subject to change), Cutting Direction :Right Hand, Flute Length :2 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :9xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

45CY78 | Hex-Shank Drill Bits

$21.36

id :1962, Mfr Model :DD5132, Measurement System :Fractional Inch, Drill Bit Size :1/2 in, Decimal Equivalent :0.5, Overall Length :4 in, Shank Type Machining :Straight, Finish Machining :Titanium, Material Machining :Titanium Nitride Coating, Primary Material Application :Aluminum; Composite; Steel; Wood, UNSPSC :27112801, Country of Origin :China (subject to change), Cutting Direction :Right Hand, Flute Length :2 in, Flute Type :Spiral, Standards :Not Rated, Shank Hex Size :1/4 in, Drill Bit Point Angle :135 °, Drill Bit Point Type :Split Point, Number of Flutes :2, Spiral Direction :Right Hand, Helix Angle :21° to 34°, Depth Dia Ratio :9xD, Primary Material Application ISO Code :P, Material Grade Machining :M35, Web Construction :Tapered, Impact Rating :Yes,

+ Add to Cart

45CY83 | Hex-Shank Drill Bits

$2.69

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY84 | Hex-Shank Drill Bits

$2.62

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY85 | Hex-Shank Drill Bits

$2.62

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY86 | Hex-Shank Drill Bits

$2.72

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY87 | Hex-Shank Drill Bits

$3.35

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY88 | Hex-Shank Drill Bits

$3.59

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY89 | Hex-Shank Drill Bits

$3.77

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY90 | Hex-Shank Drill Bits

$3.97

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY91 | Hex-Shank Drill Bits

$3.24

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY92 | Hex-Shank Drill Bits

$4.00

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY94 | Hex-Shank Drill Bits

$4.89

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY95 | Hex-Shank Drill Bits

$5.33

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY96 | Hex-Shank Drill Bits

$7.51

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY97 | Hex-Shank Drill Bits

$11.38

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY98 | Hex-Shank Drill Bits

$12.82

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45CY99 | Hex-Shank Drill Bits

$17.33

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM68 | Hex-Shank Drill Bits

$4.75

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM69 | Hex-Shank Drill Bits

$5.32

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM70 | Hex-Shank Drill Bits

$5.78

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM71 | Hex-Shank Drill Bits

$6.26

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM72 | Hex-Shank Drill Bits

$7.09

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM73 | Hex-Shank Drill Bits

$3.14

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM74 | Hex-Shank Drill Bits

$3.13

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM75 | Hex-Shank Drill Bits

$3.37

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM76 | Hex-Shank Drill Bits

$3.56

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM77 | Hex-Shank Drill Bits

$3.68

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart

45KM78 | Hex-Shank Drill Bits

$4.14

The TiN coating on these drill bits protects the bits from wear, increases chip flow in softer materials, and allows the bits to run at higher speeds than drill bits with a black-oxide finish. The bits are made from high-speed steel, which provides some flexibility and absorbs some shock and vibration.

+ Add to Cart
× Success!success