Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Carbide Square End Mills

product-img product-img

45XX77 | High-Performance Roughing/Finishing Carbide Square End Mills

$36.23

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX78 | High-Performance Roughing/Finishing Carbide Square End Mills

$43.03

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX79 | High-Performance Roughing/Finishing Carbide Square End Mills

$59.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX80 | High-Performance Roughing/Finishing Carbide Square End Mills

$65.23

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX81 | High-Performance Roughing/Finishing Carbide Square End Mills

$79.00

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX82 | High-Performance Roughing/Finishing Carbide Square End Mills

$35.90

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX83 | High-Performance Roughing/Finishing Carbide Square End Mills

$42.77

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX84 | High-Performance Roughing/Finishing Carbide Square End Mills

$37.00

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX85 | High-Performance Roughing/Finishing Carbide Square End Mills

$43.67

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX86 | High-Performance Roughing/Finishing Carbide Square End Mills

$49.90

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX87 | High-Performance Roughing/Finishing Carbide Square End Mills

$62.38

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX88 | High-Performance Roughing/Finishing Carbide Square End Mills

$49.94

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX89 | High-Performance Roughing/Finishing Carbide Square End Mills

$62.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX90 | High-Performance Roughing/Finishing Carbide Square End Mills

$81.01

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX91 | High-Performance Roughing/Finishing Carbide Square End Mills

$98.93

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX92 | High-Performance Roughing/Finishing Carbide Square End Mills

$70.37

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX93 | High-Performance Roughing/Finishing Carbide Square End Mills

$81.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX94 | High-Performance Roughing/Finishing Carbide Square End Mills

$100.69

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX95 | High-Performance Roughing/Finishing Carbide Square End Mills

$126.58

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX96 | High-Performance Roughing/Finishing Carbide Square End Mills

$131.96

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX97 | High-Performance Roughing/Finishing Carbide Square End Mills

$159.40

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XX98 | High-Performance Roughing/Finishing Carbide Square End Mills

$100.07

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XX99 | High-Performance Roughing/Finishing Carbide Square End Mills

$113.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XY01 | High-Performance Roughing/Finishing Carbide Square End Mills

$131.53

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XY02 | High-Performance Roughing/Finishing Carbide Square End Mills

$159.19

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XY03 | High-Performance Roughing/Finishing Carbide Square End Mills

$164.68

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XY04 | High-Performance Roughing/Finishing Carbide Square End Mills

$196.86

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XY05 | High-Performance Roughing/Finishing Carbide Square End Mills

$198.50

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XY06 | High-Performance Roughing/Finishing Carbide Square End Mills

$236.19

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XY07 | High-Performance Roughing/Finishing Carbide Square End Mills

$167.51

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success！success