Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Carbide Square End Mills

product-img product-img

48LM79 | High-Performance Roughing/Finishing Carbide Square End Mills

$35.75

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LM80 | High-Performance Roughing/Finishing Carbide Square End Mills

$51.05

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LM81 | High-Performance Roughing/Finishing Carbide Square End Mills

$69.07

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LM82 | High-Performance Roughing/Finishing Carbide Square End Mills

$97.88

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LM83 | High-Performance Roughing/Finishing Carbide Square End Mills

$123.68

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LM85 | High-Performance Roughing/Finishing Carbide Square End Mills

$179.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

52ZG13 | High-Performance Roughing/Finishing Carbide Square End Mills

$9.49

The Altima coating on these end mills protects them from wear. It is more resistant to high heat than TiN, TiCN, and TiAlN coatings and is more wear-resistant than a standard AlTiN coating.

+ Add to Cart
product-img product-img

52ZG14 | High-Performance Roughing/Finishing Carbide Square End Mills

$9.52

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG20 | High-Performance Roughing/Finishing Carbide Square End Mills

$12.55

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG21 | High-Performance Roughing/Finishing Carbide Square End Mills

$14.44

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG24 | High-Performance Roughing/Finishing Carbide Square End Mills

$14.44

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG27 | High-Performance Roughing/Finishing Carbide Square End Mills

$16.83

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG31 | High-Performance Roughing/Finishing Carbide Square End Mills

$29.35

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG36 | High-Performance Roughing/Finishing Carbide Square End Mills

$39.65

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG39 | High-Performance Roughing/Finishing Carbide Square End Mills

$99.79

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG52 | High-Performance Roughing/Finishing Carbide Square End Mills

$35.40

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG56 | High-Performance Roughing/Finishing Carbide Square End Mills

$21.58

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG57 | High-Performance Roughing/Finishing Carbide Square End Mills

$43.96

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG58 | High-Performance Roughing/Finishing Carbide Square End Mills

$58.82

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZG85 | High-Performance Roughing/Finishing Carbide Square End Mills

$21.24

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

52ZH35 | High-Performance Roughing/Finishing Carbide Square End Mills

$11.63

The Altima coating on these end mills protects them from wear. It is more resistant to high heat than TiN, TiCN, and TiAlN coatings and is more wear-resistant than a standard AlTiN coating.

+ Add to Cart
product-img product-img

52ZH58 | High-Performance Roughing/Finishing Carbide Square End Mills

$19.60

The Altima coating on these end mills protects them from wear. It is more resistant to high heat than TiN, TiCN, and TiAlN coatings and is more wear-resistant than a standard AlTiN coating.

+ Add to Cart
product-img product-img

52ZH70 | High-Performance Roughing/Finishing Carbide Square End Mills

$32.44

The Altima coating on these end mills protects them from wear. It is more resistant to high heat than TiN, TiCN, and TiAlN coatings and is more wear-resistant than a standard AlTiN coating.

+ Add to Cart
product-img product-img

52ZH82 | High-Performance Roughing/Finishing Carbide Square End Mills

$51.77

The Altima coating on these end mills protects them from wear. It is more resistant to high heat than TiN, TiCN, and TiAlN coatings and is more wear-resistant than a standard AlTiN coating.

+ Add to Cart
product-img product-img

52ZJ64 | High-Performance Roughing/Finishing Carbide Square End Mills

$154.18

The Altima coating on these end mills protects them from wear. It is more resistant to high heat than TiN, TiCN, and TiAlN coatings and is more wear-resistant than a standard AlTiN coating.

+ Add to Cart
product-img product-img

54FE01 | High-Performance Roughing/Finishing Carbide Square End Mills

$26.18

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

54FE08 | High-Performance Roughing/Finishing Carbide Square End Mills

$78.26

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

54FE11 | High-Performance Roughing/Finishing Carbide Square End Mills

$149.47

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

54FE14 | High-Performance Roughing/Finishing Carbide Square End Mills

$31.51

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

54FE18 | High-Performance Roughing/Finishing Carbide Square End Mills

$48.78

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
× Success！success