Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Carbide Square End Mills

product-img product-img

4YAT7 | High-Performance Roughing/Finishing Carbide Square End Mills

$666.10

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

14M385 | High-Performance Roughing/Finishing Carbide Square End Mills

$17.72

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F212 | High-Performance Roughing/Finishing Carbide Square End Mills

$11.93

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F213 | High-Performance Roughing/Finishing Carbide Square End Mills

$13.65

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16F215 | High-Performance Roughing/Finishing Carbide Square End Mills

$15.59

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16F221 | High-Performance Roughing/Finishing Carbide Square End Mills

$18.94

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16F226 | High-Performance Roughing/Finishing Carbide Square End Mills

$26.91

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F230 | High-Performance Roughing/Finishing Carbide Square End Mills

$30.71

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F234 | High-Performance Roughing/Finishing Carbide Square End Mills

$54.68

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F235 | High-Performance Roughing/Finishing Carbide Square End Mills

$59.68

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16F236 | High-Performance Roughing/Finishing Carbide Square End Mills

$46.09

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F237 | High-Performance Roughing/Finishing Carbide Square End Mills

$52.71

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F252 | High-Performance Roughing/Finishing Carbide Square End Mills

$22.28

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F260 | High-Performance Roughing/Finishing Carbide Square End Mills

$25.39

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16F264 | High-Performance Roughing/Finishing Carbide Square End Mills

$32.31

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

287RE5 | High-Performance Roughing/Finishing Carbide Square End Mills

$83.86

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287RE9 | High-Performance Roughing/Finishing Carbide Square End Mills

$91.35

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287RN5 | High-Performance Roughing/Finishing Carbide Square End Mills

$120.43

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287RN6 | High-Performance Roughing/Finishing Carbide Square End Mills

$139.14

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287RN8 | High-Performance Roughing/Finishing Carbide Square End Mills

$191.02

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287RP1 | High-Performance Roughing/Finishing Carbide Square End Mills

$307.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287RP2 | High-Performance Roughing/Finishing Carbide Square End Mills

$64.17

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

30L350 | High-Performance Roughing/Finishing Carbide Square End Mills

$13.48

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

30L351 | High-Performance Roughing/Finishing Carbide Square End Mills

$12.91

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

30L352 | High-Performance Roughing/Finishing Carbide Square End Mills

$12.91

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

30L353 | High-Performance Roughing/Finishing Carbide Square End Mills

$12.91

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

30L354 | High-Performance Roughing/Finishing Carbide Square End Mills

$263.83

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

30L355 | High-Performance Roughing/Finishing Carbide Square End Mills

$12.91

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

30L356 | High-Performance Roughing/Finishing Carbide Square End Mills

$12.42

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

30L357 | High-Performance Roughing/Finishing Carbide Square End Mills

$17.23

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
× Success！success