Search Products

FilterClear All

Inquiry

High-Speed Steel Extended-Length Drill Bits

440M15 | High-Speed Steel Extended-Length Drill Bits

$20.05

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M57 | High-Speed Steel Extended-Length Drill Bits

$183.35

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M58 | High-Speed Steel Extended-Length Drill Bits

$187.28

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M59 | High-Speed Steel Extended-Length Drill Bits

$227.24

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M60 | High-Speed Steel Extended-Length Drill Bits

$353.65

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M61 | High-Speed Steel Extended-Length Drill Bits

$74.27

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M62 | High-Speed Steel Extended-Length Drill Bits

$90.38

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M63 | High-Speed Steel Extended-Length Drill Bits

$99.15

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M64 | High-Speed Steel Extended-Length Drill Bits

$93.11

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440M65 | High-Speed Steel Extended-Length Drill Bits

$132.94

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440P13 | High-Speed Steel Extended-Length Drill Bits

$10.88

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440P14 | High-Speed Steel Extended-Length Drill Bits

$9.83

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440P15 | High-Speed Steel Extended-Length Drill Bits

$10.87

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440P16 | High-Speed Steel Extended-Length Drill Bits

$7.81

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440P17 | High-Speed Steel Extended-Length Drill Bits

$7.45

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440P18 | High-Speed Steel Extended-Length Drill Bits

$7.10

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V70 | High-Speed Steel Extended-Length Drill Bits

$7.22

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V71 | High-Speed Steel Extended-Length Drill Bits

$6.91

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V72 | High-Speed Steel Extended-Length Drill Bits

$6.24

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V73 | High-Speed Steel Extended-Length Drill Bits

$5.84

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V74 | High-Speed Steel Extended-Length Drill Bits

$5.02

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V75 | High-Speed Steel Extended-Length Drill Bits

$5.21

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V76 | High-Speed Steel Extended-Length Drill Bits

$7.67

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V77 | High-Speed Steel Extended-Length Drill Bits

$5.21

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V78 | High-Speed Steel Extended-Length Drill Bits

$6.73

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V79 | High-Speed Steel Extended-Length Drill Bits

$5.21

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V80 | High-Speed Steel Extended-Length Drill Bits

$5.21

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V81 | High-Speed Steel Extended-Length Drill Bits

$16.50

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V83 | High-Speed Steel Extended-Length Drill Bits

$22.26

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart

440V86 | High-Speed Steel Extended-Length Drill Bits

$22.52

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
× Success!success