Product catagories

Search Products

FilterClear All

Inquiry

High-Speed Steel Straight-Flute Hand Taps

product-img product-img

33YP99 | High-Speed Steel Straight-Flute Hand Taps

$10.81

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR01 | High-Speed Steel Straight-Flute Hand Taps

$12.31

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR02 | High-Speed Steel Straight-Flute Hand Taps

$12.37

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR03 | High-Speed Steel Straight-Flute Hand Taps

$13.04

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR04 | High-Speed Steel Straight-Flute Hand Taps

$10.81

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR05 | High-Speed Steel Straight-Flute Hand Taps

$12.16

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR06 | High-Speed Steel Straight-Flute Hand Taps

$12.94

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR07 | High-Speed Steel Straight-Flute Hand Taps

$11.69

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR08 | High-Speed Steel Straight-Flute Hand Taps

$10.99

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR09 | High-Speed Steel Straight-Flute Hand Taps

$11.69

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR10 | High-Speed Steel Straight-Flute Hand Taps

$11.36

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR11 | High-Speed Steel Straight-Flute Hand Taps

$11.69

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR12 | High-Speed Steel Straight-Flute Hand Taps

$8.33

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR13 | High-Speed Steel Straight-Flute Hand Taps

$10.46

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR14 | High-Speed Steel Straight-Flute Hand Taps

$8.33

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR15 | High-Speed Steel Straight-Flute Hand Taps

$10.46

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR16 | High-Speed Steel Straight-Flute Hand Taps

$8.33

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR17 | High-Speed Steel Straight-Flute Hand Taps

$10.28

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR18 | High-Speed Steel Straight-Flute Hand Taps

$9.16

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR19 | High-Speed Steel Straight-Flute Hand Taps

$9.49

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR20 | High-Speed Steel Straight-Flute Hand Taps

$8.92

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR21 | High-Speed Steel Straight-Flute Hand Taps

$9.49

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR22 | High-Speed Steel Straight-Flute Hand Taps

$11.24

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR23 | High-Speed Steel Straight-Flute Hand Taps

$8.35

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR24 | High-Speed Steel Straight-Flute Hand Taps

$9.29

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR25 | High-Speed Steel Straight-Flute Hand Taps

$10.31

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR26 | High-Speed Steel Straight-Flute Hand Taps

$6.80

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR27 | High-Speed Steel Straight-Flute Hand Taps

$8.12

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR28 | High-Speed Steel Straight-Flute Hand Taps

$8.24

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR29 | High-Speed Steel Straight-Flute Hand Taps

$8.12

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
× Success！success