Product catagories

Search Products

FilterClear All

Inquiry

High-Speed Steel Straight-Flute Hand Taps

product-img product-img

33YR91 | High-Speed Steel Straight-Flute Hand Taps

$5.74

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR92 | High-Speed Steel Straight-Flute Hand Taps

$7.39

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR93 | High-Speed Steel Straight-Flute Hand Taps

$5.17

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR94 | High-Speed Steel Straight-Flute Hand Taps

$9.26

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR95 | High-Speed Steel Straight-Flute Hand Taps

$5.54

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YR96 | High-Speed Steel Straight-Flute Hand Taps

$8.30

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR97 | High-Speed Steel Straight-Flute Hand Taps

$10.08

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YR98 | High-Speed Steel Straight-Flute Hand Taps

$5.20

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YR99 | High-Speed Steel Straight-Flute Hand Taps

$6.67

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT01 | High-Speed Steel Straight-Flute Hand Taps

$5.99

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT02 | High-Speed Steel Straight-Flute Hand Taps

$6.67

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT03 | High-Speed Steel Straight-Flute Hand Taps

$5.22

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YT04 | High-Speed Steel Straight-Flute Hand Taps

$6.67

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT05 | High-Speed Steel Straight-Flute Hand Taps

$5.45

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YT06 | High-Speed Steel Straight-Flute Hand Taps

$8.69

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT07 | High-Speed Steel Straight-Flute Hand Taps

$7.18

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT08 | High-Speed Steel Straight-Flute Hand Taps

$8.36

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT09 | High-Speed Steel Straight-Flute Hand Taps

$4.82

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YT10 | High-Speed Steel Straight-Flute Hand Taps

$8.44

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT11 | High-Speed Steel Straight-Flute Hand Taps

$8.69

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT12 | High-Speed Steel Straight-Flute Hand Taps

$5.65

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YT13 | High-Speed Steel Straight-Flute Hand Taps

$8.61

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT14 | High-Speed Steel Straight-Flute Hand Taps

$8.90

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT15 | High-Speed Steel Straight-Flute Hand Taps

$8.79

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT16 | High-Speed Steel Straight-Flute Hand Taps

$9.86

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT17 | High-Speed Steel Straight-Flute Hand Taps

$5.65

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YT18 | High-Speed Steel Straight-Flute Hand Taps

$9.68

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT19 | High-Speed Steel Straight-Flute Hand Taps

$8.61

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT20 | High-Speed Steel Straight-Flute Hand Taps

$8.90

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YT21 | High-Speed Steel Straight-Flute Hand Taps

$8.61

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
× Success！success