Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

product-img product-img

34XJ43 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.59

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ44 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$67.70

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ45 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$61.39

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ46 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$62.83

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ47 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$64.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ48 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$64.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ49 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$64.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ50 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$64.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ51 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$69.36

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ52 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$79.45

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ53 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$69.36

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ54 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$69.36

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ55 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$72.54

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ56 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$68.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ57 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$68.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ58 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$68.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ59 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$68.72

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ60 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$71.32

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ61 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$78.47

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ62 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$78.47

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ63 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$69.24

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ64 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$79.24

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ65 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$70.54

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ67 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$70.54

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ68 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$77.38

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ69 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$77.38

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ70 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$77.38

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ71 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$77.38

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ72 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$77.38

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ73 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$77.38

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success