Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

product-img product-img

33GM15 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.08

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM16 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$22.43

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM17 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$23.57

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM18 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$23.92

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM19 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$26.75

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM20 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$27.74

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM21 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$30.17

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM22 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$32.20

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM23 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$33.58

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM24 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$33.31

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM25 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$39.71

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM26 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$53.99

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM27 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$80.06

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM28 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$109.11

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33GM29 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$139.09

These drill bits come in standard sizes expressed in fractional inches. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33PC42 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$75.67

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33PC43 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$71.32

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

33PC58 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$83.47

The WD1 coating on these drill bits is harder than a TiAlN coating, has excellent heat resistance, and protects the tool from wear when drilling into steel, stainless steel, hardened steel, and cast iron. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ30 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$60.98

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ31 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$60.98

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ32 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.99

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ33 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.99

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ34 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$67.91

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ35 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.99

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ36 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.99

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ37 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$60.98

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ39 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.20

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ40 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.99

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ41 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.99

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

34XJ42 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$59.59

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success