Search Products

FilterClear All

Inquiry

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

34XJ74 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$84.39

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ75 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$84.39

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ76 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$81.92

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ77 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$81.92

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ78 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$84.39

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ79 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$89.04

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ80 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$89.04

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ81 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$89.04

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ83 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$89.04

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ85 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$93.71

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ86 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$93.71

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ87 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$93.71

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ88 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$93.71

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ89 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$98.53

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ90 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$107.34

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ92 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$115.21

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ93 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$115.21

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ94 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$126.43

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ95 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$126.43

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ96 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$126.43

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ97 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$126.43

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ98 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$126.43

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XJ99 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$128.47

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XK01 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$128.47

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XK02 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$146.99

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XK03 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$128.47

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XK04 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$128.47

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XK05 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$146.23

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XK06 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$150.63

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

34XK07 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$150.63

The WXS coating on these drill bits protects them from wear and provides maximum heat resistance when drilling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating. These bits have slow-spiral flutes that provide good chip evacuation in horizontal drilling applications. They also have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success!success