Search Products

440M12 High-Speed Steel Extended-Length Drill Bits

$30.72

Bulk orders will be discounted, please contact us.

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

Product Number: 440M12

SEND INQUIRY

  • Description
Mfr Model A1622-NO6
Measurement System Wire
Drill Bit Size #6
Decimal Equivalent 0.2040
Maximum Drilling Depth 5-5/16 in
Overall Length 195.00 mm
Shank Type Machining Straight
Finish Machining Bright (Uncoated)
Material Machining High Speed Steel
Primary Material Application Aluminum; Brass; Bronze; Cast Iron; Copper; Steel
UNSPSC 27112801
Country of Origin France (subject to change)
Cutting Direction Right Hand
Flute Length 5-5/16 in
Flute Type Parabolic
Standards DIN 1869 R1
Drill Bit Point Angle 130 °
Drill Bit Point Type Conventional Point
Number of Flutes 2
Spiral Direction Right Hand
Helix Angle 28°
Depth Dia Ratio 16xD
Shank Dia 5.18 mm
Primary Material Application ISO Code K; N; P
Material Grade Machining General Purpose
Drill Length Class Extra Long
Sheeter Drill No
Drill Point Length 1.21mm
Shank Length 60.00 mm
Coolant Fed Non-Coolant Through
Drill Diameter Tolerance H8
Secondary Material Application Composite; Nickel; Stainless Steel; Titanium
Secondary Material Application ISO Code M; O; S
× Success!success