Search Products

53FP56 High-Speed Steel Extended-Length Drill Bits

$37.82

Bulk orders will be discounted, please contact us.

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

Product Number: 53FP56

SEND INQUIRY

  • Description
Mfr Model C20489
Measurement System Fractional Inch
Drill Bit Size 3/8 in
Decimal Equivalent 0.3750
Maximum Drilling Depth 1-1/2 in
Overall Length 18 in
Shank Type Machining Straight
Finish Machining Black Oxide
Material Machining High Speed Steel
Primary Material Application Cast Iron; Steel
UNSPSC 27112801
Country of Origin USA (subject to change)
Cutting Direction Right Hand
Flute Length 14 in
Flute Type Spiral
Standards ASME
Drill Bit Point Angle 118 °
Drill Bit Point Type Notched Point
Number of Flutes 2
Spiral Direction Right Hand
Helix Angle 21° to 34°
Depth Dia Ratio 4xD
Shank Dia 3/8 in
Primary Material Application ISO Code K; P
Material Grade Machining General Purpose
Drill Length Class Extra Long
Sheeter Drill No
Drill Point Length 0.1127 in
Shank Length 4 in
Coolant Fed Non-Coolant Through
Drill Diameter Tolerance +0.0000 in /-0.0010 in
Secondary Material Application Aluminum; Brass; Bronze; Composite; Copper; Graphite; Steel
Secondary Material Application ISO Code N; O; P
× Success!success