Search Products

FilterClear All

Inquiry

General Purpose Spiral-Point Taps

449T93 | General Purpose Spiral-Point Taps

$22.58

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

449T94 | General Purpose Spiral-Point Taps

$22.61

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

45EN10 | General Purpose Spiral-Point Taps

$25.21

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN12 | General Purpose Spiral-Point Taps

$16.51

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN13 | General Purpose Spiral-Point Taps

$16.68

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN14 | General Purpose Spiral-Point Taps

$16.73

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN15 | General Purpose Spiral-Point Taps

$14.16

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN16 | General Purpose Spiral-Point Taps

$14.00

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN17 | General Purpose Spiral-Point Taps

$14.17

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN18 | General Purpose Spiral-Point Taps

$13.97

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN19 | General Purpose Spiral-Point Taps

$14.17

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN20 | General Purpose Spiral-Point Taps

$14.12

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN21 | General Purpose Spiral-Point Taps

$13.66

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN22 | General Purpose Spiral-Point Taps

$13.96

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN23 | General Purpose Spiral-Point Taps

$14.83

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN24 | General Purpose Spiral-Point Taps

$14.49

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN25 | General Purpose Spiral-Point Taps

$17.48

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN26 | General Purpose Spiral-Point Taps

$17.50

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN27 | General Purpose Spiral-Point Taps

$19.61

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN28 | General Purpose Spiral-Point Taps

$19.42

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN29 | General Purpose Spiral-Point Taps

$25.09

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN30 | General Purpose Spiral-Point Taps

$25.04

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN31 | General Purpose Spiral-Point Taps

$29.34

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN32 | General Purpose Spiral-Point Taps

$29.29

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN33 | General Purpose Spiral-Point Taps

$39.94

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN34 | General Purpose Spiral-Point Taps

$39.92

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN35 | General Purpose Spiral-Point Taps

$52.40

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN36 | General Purpose Spiral-Point Taps

$51.73

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN37 | General Purpose Spiral-Point Taps

$80.23

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN38 | General Purpose Spiral-Point Taps

$79.33

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
× Success!success