Search Products

FilterClear All

Inquiry

General Purpose Spiral-Point Taps

45EN39 | General Purpose Spiral-Point Taps

$116.70

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN40 | General Purpose Spiral-Point Taps

$116.69

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN41 | General Purpose Spiral-Point Taps

$155.80

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN42 | General Purpose Spiral-Point Taps

$161.57

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN43 | General Purpose Spiral-Point Taps

$21.46

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN44 | General Purpose Spiral-Point Taps

$18.80

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN45 | General Purpose Spiral-Point Taps

$18.77

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN46 | General Purpose Spiral-Point Taps

$18.77

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN47 | General Purpose Spiral-Point Taps

$19.04

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN48 | General Purpose Spiral-Point Taps

$20.64

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN49 | General Purpose Spiral-Point Taps

$21.23

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN50 | General Purpose Spiral-Point Taps

$21.24

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN51 | General Purpose Spiral-Point Taps

$27.73

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN52 | General Purpose Spiral-Point Taps

$28.01

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN53 | General Purpose Spiral-Point Taps

$32.43

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN54 | General Purpose Spiral-Point Taps

$32.50

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN55 | General Purpose Spiral-Point Taps

$36.09

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN56 | General Purpose Spiral-Point Taps

$35.65

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN57 | General Purpose Spiral-Point Taps

$51.31

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN58 | General Purpose Spiral-Point Taps

$51.17

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN59 | General Purpose Spiral-Point Taps

$75.45

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EN60 | General Purpose Spiral-Point Taps

$75.45

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP64 | General Purpose Spiral-Point Taps

$29.94

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP65 | General Purpose Spiral-Point Taps

$23.98

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP66 | General Purpose Spiral-Point Taps

$20.12

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP67 | General Purpose Spiral-Point Taps

$19.82

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP68 | General Purpose Spiral-Point Taps

$19.88

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP69 | General Purpose Spiral-Point Taps

$16.66

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP70 | General Purpose Spiral-Point Taps

$16.50

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

45EP71 | General Purpose Spiral-Point Taps

$16.70

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
× Success!success