Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Spiral-Point Taps

product-img product-img

45EP72 | General Purpose Spiral-Point Taps

$16.70

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP73 | General Purpose Spiral-Point Taps

$18.04

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP74 | General Purpose Spiral-Point Taps

$17.99

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP75 | General Purpose Spiral-Point Taps

$18.01

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP76 | General Purpose Spiral-Point Taps

$18.05

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP77 | General Purpose Spiral-Point Taps

$19.64

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP78 | General Purpose Spiral-Point Taps

$19.64

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP79 | General Purpose Spiral-Point Taps

$21.85

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP80 | General Purpose Spiral-Point Taps

$21.85

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP81 | General Purpose Spiral-Point Taps

$24.54

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP82 | General Purpose Spiral-Point Taps

$24.58

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP83 | General Purpose Spiral-Point Taps

$30.28

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP84 | General Purpose Spiral-Point Taps

$29.86

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP85 | General Purpose Spiral-Point Taps

$34.54

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP86 | General Purpose Spiral-Point Taps

$34.42

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP87 | General Purpose Spiral-Point Taps

$47.69

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP88 | General Purpose Spiral-Point Taps

$47.63

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP89 | General Purpose Spiral-Point Taps

$62.28

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP90 | General Purpose Spiral-Point Taps

$59.99

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP91 | General Purpose Spiral-Point Taps

$85.82

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP92 | General Purpose Spiral-Point Taps

$95.55

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP93 | General Purpose Spiral-Point Taps

$140.38

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP94 | General Purpose Spiral-Point Taps

$140.39

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP95 | General Purpose Spiral-Point Taps

$139.69

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP96 | General Purpose Spiral-Point Taps

$186.17

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP97 | General Purpose Spiral-Point Taps

$25.95

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP98 | General Purpose Spiral-Point Taps

$25.59

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45EP99 | General Purpose Spiral-Point Taps

$25.85

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45ER01 | General Purpose Spiral-Point Taps

$25.82

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45ER02 | General Purpose Spiral-Point Taps

$25.86

The hardlube coating on these taps protects them from wear. Sometimes called hardslick, it has an inner layer of titanium aluminum nitride (TiAlN) and an outer layer of tungsten carbide/carbon (WC/C). The TiAlN layer withstands high temperatures and protects the taps from wear. The WC/C layer has a low coefficient of friction and helps prevent chips from sticking to the tool in dry-machining applications. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
× Success！success