Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Carbide Square End Mills

product-img product-img

785VR7 | High-Performance Roughing/Finishing Carbide Square End Mills

$59.99

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

785VU2 | High-Performance Roughing/Finishing Carbide Square End Mills

$313.22

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

785VU5 | High-Performance Roughing/Finishing Carbide Square End Mills

$40.10

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

785VU7 | High-Performance Roughing/Finishing Carbide Square End Mills

$47.12

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

785VX0 | High-Performance Roughing/Finishing Carbide Square End Mills

$55.36

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

785VX6 | High-Performance Roughing/Finishing Carbide Square End Mills

$76.39

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

785VY2 | High-Performance Roughing/Finishing Carbide Square End Mills

$202.10

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

800VJ3 | High-Performance Roughing/Finishing Carbide Square End Mills

$74.59

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

800VJ4 | High-Performance Roughing/Finishing Carbide Square End Mills

$40.19

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

800VJ5 | High-Performance Roughing/Finishing Carbide Square End Mills

$54.98

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

800VJ6 | High-Performance Roughing/Finishing Carbide Square End Mills

$55.78

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

800VJ7 | High-Performance Roughing/Finishing Carbide Square End Mills

$54.98

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

800VJ9 | High-Performance Roughing/Finishing Carbide Square End Mills

$26.03

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

807R22 | High-Performance Roughing/Finishing Carbide Square End Mills

$52.86

id :5991, Mfr Model :C76270, Length of Cut :3/4 in, Overall Length :2-1/2 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/8 in, Shank Diameter :3/8 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R25 | High-Performance Roughing/Finishing Carbide Square End Mills

$53.75

id :5992, Mfr Model :C76273, Length of Cut :15/16 in, Overall Length :2-1/2 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/8 in, Shank Diameter :3/8 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R28 | High-Performance Roughing/Finishing Carbide Square End Mills

$60.16

id :5993, Mfr Model :C76276, Length of Cut :1-1/8 in, Overall Length :3 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/8 in, Shank Diameter :3/8 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R31 | High-Performance Roughing/Finishing Carbide Square End Mills

$71.87

id :5994, Mfr Model :C76279, Length of Cut :1-1/2 in, Overall Length :3-1/2 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/8 in, Shank Diameter :3/8 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R34 | High-Performance Roughing/Finishing Carbide Square End Mills

$78.16

id :5995, Mfr Model :C76282, Length of Cut :1 in, Overall Length :3 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :1/2 in, Shank Diameter :1/2 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R38 | High-Performance Roughing/Finishing Carbide Square End Mills

$85.05

id :5996, Mfr Model :C76286, Length of Cut :1-1/4 in, Overall Length :3 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :1/2 in, Shank Diameter :1/2 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R42 | High-Performance Roughing/Finishing Carbide Square End Mills

$90.93

id :5997, Mfr Model :C76290, Length of Cut :1-1/2 in, Overall Length :3-1/2 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :1/2 in, Shank Diameter :1/2 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R46 | High-Performance Roughing/Finishing Carbide Square End Mills

$102.95

id :5998, Mfr Model :C76294, Length of Cut :2 in, Overall Length :4 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :1/2 in, Shank Diameter :1/2 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R50 | High-Performance Roughing/Finishing Carbide Square End Mills

$110.99

id :5999, Mfr Model :C76298, Length of Cut :2-1/4 in, Overall Length :4 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :1/2 in, Shank Diameter :1/2 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R54 | High-Performance Roughing/Finishing Carbide Square End Mills

$153.52

id :6000, Mfr Model :C76302, Length of Cut :1-7/8 in, Overall Length :4 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :5/8 in, Shank Diameter :5/8 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R58 | High-Performance Roughing/Finishing Carbide Square End Mills

$150.44

id :6001, Mfr Model :C76306, Length of Cut :2-1/4 in, Overall Length :4 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :5/8 in, Shank Diameter :5/8 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R62 | High-Performance Roughing/Finishing Carbide Square End Mills

$213.58

id :6002, Mfr Model :C76310, Length of Cut :3 in, Overall Length :6 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :5/8 in, Shank Diameter :5/8 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R65 | High-Performance Roughing/Finishing Carbide Square End Mills

$174.22

id :6003, Mfr Model :C76313, Length of Cut :1-1/2 in, Overall Length :4 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/4 in, Shank Diameter :3/4 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R69 | High-Performance Roughing/Finishing Carbide Square End Mills

$197.03

id :6004, Mfr Model :C76317, Length of Cut :1-7/8 in, Overall Length :4 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/4 in, Shank Diameter :3/4 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R74 | High-Performance Roughing/Finishing Carbide Square End Mills

$237.96

id :6005, Mfr Model :C76322, Length of Cut :2-1/4 in, Overall Length :5 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/4 in, Shank Diameter :3/4 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R79 | High-Performance Roughing/Finishing Carbide Square End Mills

$254.35

id :6006, Mfr Model :C76327, Length of Cut :2-5/8 in, Overall Length :5 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/4 in, Shank Diameter :3/4 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
product-img product-img

807R84 | High-Performance Roughing/Finishing Carbide Square End Mills

$191.91

id :6007, Mfr Model :C76332, Length of Cut :3 in, Overall Length :6 in, Neck Length :0.705 in, Measurement System :Fractional Inch, Number of Flutes :7, End Mill Style :Square, Primary Material Application :Alloy Steel; Austenitic Stainless Steel; Low Carbon Steel; Martensitic Stainless Steel; Ni, Co, Fe Based Super Alloy; Titanium Hi-Temp Alloy, End Mill Cutting Type :Non-Center Cutting, List Number :CEM-V3-7R, Helix Angle :38 °, Cutting Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drilling Tool Configuration :Individual, UNSPSC :23172005, Country of Origin :USA (subject to change), Shank Type :Straight, Material :Carbide, Finish :AP/MAX, Milling Diameter :3/4 in, Shank Diameter :3/4 in, End Mill Application :Finishing; Roughing, Material Grade :High Performance, Primary Material Application ISO Code :M; P; S, Spiral Direction :Right Hand, Secondary Material Application :General Purpose, Secondary Material Application ISO Code :K; M; P; S, Material Applications :High-Temp Alloy; Stainless; Steel, Flute Type :Helical, Min Helix Angle :36 °, Max Helix Angle :30 °, Neck Dia :0.7050 in, For Material Hardness :Upto 70 HRC,

+ Add to Cart
× Success！success