Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Carbide Square End Mills

product-img product-img

35AR79 | High-Performance Roughing/Finishing Carbide Square End Mills

$50.86

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR80 | High-Performance Roughing/Finishing Carbide Square End Mills

$50.86

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR81 | High-Performance Roughing/Finishing Carbide Square End Mills

$51.97

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR83 | High-Performance Roughing/Finishing Carbide Square End Mills

$45.53

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR84 | High-Performance Roughing/Finishing Carbide Square End Mills

$52.50

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR85 | High-Performance Roughing/Finishing Carbide Square End Mills

$52.50

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR86 | High-Performance Roughing/Finishing Carbide Square End Mills

$52.50

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR87 | High-Performance Roughing/Finishing Carbide Square End Mills

$52.50

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR88 | High-Performance Roughing/Finishing Carbide Square End Mills

$32.48

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AR89 | High-Performance Roughing/Finishing Carbide Square End Mills

$27.29

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT22 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT23 | High-Performance Roughing/Finishing Carbide Square End Mills

$45.83

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT24 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT25 | High-Performance Roughing/Finishing Carbide Square End Mills

$36.99

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT26 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT27 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT28 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT29 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT30 | High-Performance Roughing/Finishing Carbide Square End Mills

$27.89

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT31 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT32 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT33 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT34 | High-Performance Roughing/Finishing Carbide Square End Mills

$44.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT35 | High-Performance Roughing/Finishing Carbide Square End Mills

$43.78

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT36 | High-Performance Roughing/Finishing Carbide Square End Mills

$50.86

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT37 | High-Performance Roughing/Finishing Carbide Square End Mills

$50.86

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT38 | High-Performance Roughing/Finishing Carbide Square End Mills

$50.86

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT39 | High-Performance Roughing/Finishing Carbide Square End Mills

$50.86

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT40 | High-Performance Roughing/Finishing Carbide Square End Mills

$29.03

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

35AT41 | High-Performance Roughing/Finishing Carbide Square End Mills

$50.86

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
× Success！success