Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

55HP80 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$66.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP82 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$66.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP84 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$66.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP86 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$66.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP88 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$66.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP90 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$92.08

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP92 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$92.08

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP94 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$93.35

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP96 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$93.35

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HP98 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$95.62

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR01 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$92.08

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR03 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$92.08

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR05 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$97.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR07 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$97.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR09 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$97.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR11 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$97.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR13 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$97.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR15 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$97.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR17 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$98.80

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR19 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$78.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR21 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$78.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR23 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$78.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR25 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$78.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR27 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$78.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR29 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$78.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR31 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$78.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR33 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$84.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR35 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$84.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR37 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$87.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR39 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$82.75

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success!success