Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

55HR41 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$84.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR43 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$84.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR45 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$84.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR47 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$117.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR49 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$117.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR51 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$117.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR53 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$117.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR55 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$117.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR57 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$150.67

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR59 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$152.74

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR61 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$150.67

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR63 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$150.67

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR65 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$150.67

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR67 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$155.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR69 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$157.82

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR71 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$157.82

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR73 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$157.82

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR75 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$157.82

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR77 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$119.02

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR79 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$120.65

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR81 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$120.65

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR83 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$119.02

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR85 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$119.02

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR87 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$119.02

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR89 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$119.02

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR91 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$123.97

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR93 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$122.17

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR95 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$122.17

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR97 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$122.17

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HR99 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$122.17

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success!success