Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

55HT02 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$123.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT04 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$122.17

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT06 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$151.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT08 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$151.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT10 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$151.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT12 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$151.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT14 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$149.15

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT16 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$148.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT18 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$183.32

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT20 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$183.32

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT22 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$185.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT24 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$185.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT26 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$183.32

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT28 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$183.32

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT30 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$194.48

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT32 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$190.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT34 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$187.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT36 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$190.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT38 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$190.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT40 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$190.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT42 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$226.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT44 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$229.56

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT46 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$226.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT48 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$226.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT50 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$226.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT52 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$226.46

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT54 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$192.57

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT56 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$189.78

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT58 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$189.78

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

55HT60 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$189.78

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success!success