Product catagories

Search Products

FilterClear All

Inquiry

High-Speed Steel Extended-Length Drill Bits

product-img product-img

440J71 | High-Speed Steel Extended-Length Drill Bits

$28.17

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J72 | High-Speed Steel Extended-Length Drill Bits

$29.15

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J73 | High-Speed Steel Extended-Length Drill Bits

$28.63

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J75 | High-Speed Steel Extended-Length Drill Bits

$27.70

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J76 | High-Speed Steel Extended-Length Drill Bits

$85.78

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J77 | High-Speed Steel Extended-Length Drill Bits

$112.69

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J79 | High-Speed Steel Extended-Length Drill Bits

$129.01

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J80 | High-Speed Steel Extended-Length Drill Bits

$144.05

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J81 | High-Speed Steel Extended-Length Drill Bits

$26.39

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J83 | High-Speed Steel Extended-Length Drill Bits

$27.25

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J84 | High-Speed Steel Extended-Length Drill Bits

$27.25

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J85 | High-Speed Steel Extended-Length Drill Bits

$27.70

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J86 | High-Speed Steel Extended-Length Drill Bits

$28.58

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J87 | High-Speed Steel Extended-Length Drill Bits

$27.70

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J88 | High-Speed Steel Extended-Length Drill Bits

$28.75

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J90 | High-Speed Steel Extended-Length Drill Bits

$29.66

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J91 | High-Speed Steel Extended-Length Drill Bits

$27.25

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J92 | High-Speed Steel Extended-Length Drill Bits

$30.72

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J94 | High-Speed Steel Extended-Length Drill Bits

$27.83

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J95 | High-Speed Steel Extended-Length Drill Bits

$31.56

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J96 | High-Speed Steel Extended-Length Drill Bits

$28.30

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J97 | High-Speed Steel Extended-Length Drill Bits

$32.02

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J98 | High-Speed Steel Extended-Length Drill Bits

$32.88

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440J99 | High-Speed Steel Extended-Length Drill Bits

$33.28

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440K01 | High-Speed Steel Extended-Length Drill Bits

$33.92

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440K02 | High-Speed Steel Extended-Length Drill Bits

$29.66

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440K03 | High-Speed Steel Extended-Length Drill Bits

$34.45

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440K04 | High-Speed Steel Extended-Length Drill Bits

$32.02

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440K05 | High-Speed Steel Extended-Length Drill Bits

$35.03

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440K06 | High-Speed Steel Extended-Length Drill Bits

$35.03

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
× Success！success